The fascia is generally brick or concrete. However, some fascias have metal or plastic fixed to the raw surface.
If yours has concrete or brick, you will need to use a Signboard to fix your Signage to your premises.
The PVC material we mostly use for these jobs is very lightweight and can be installed by anyone with basic handyman skills.
If there is a panel already fixed, you can use our DIY Signkit. However, if you are inexperienced, this would be too big a job to tackle and we advise that you purchase our prepared Signboard product.
Please send a photo of your shopfront with your order and we will design your premises for Free!
Signage for glass is supplied in our DIY Sign Kit product - including
:1) Sign Message(s) - with applied Transfer Tape, full alignment markings, ready to use.
2) Applicator Tool
3) Applicator Fluid
4) Applicator Spray Bottle
5) Instructions
6) 24/7 Live Phone Support - Terry Davies 0423 102 973
We can accept your own artwork/design or we will design your sign for you - FREE!
Please go here to order.
DIY Sign Kits can be used for various applications - Glass, Metal, Plastic, Wood
(finished surface) - Hampers can be glass, plastic, metal.
Sometimes, Hampers can be irregular glass surfaces. In those cases, you will need a
Signboard to do the job. Lightweight PVC is the best choice.
The awning is the (usually) metal projection from your shop extending out over the footpath.
It has a front section and two sides.
Generally these awnings need our Awning Signboard product.
We use a unique design for our Awning Signboard where the Colorbond metal is folded back at 90 degrees at the top of the panel so that your installer can sit the top of the foldback directly on top of the awning. This method also keeps the metal flatter, smoother and straighter than sheet metal flat format, the generally used style throughout the Sign Industry.
This method makes for very easy installation and alignment. Typically, the installation becomes a one man job at handyman skill levels, no matter what the length or height.
Please send a photo of your awning, front and both sides with your order and we will design your premises for Free!
The hamper is the uppermost section of your shopfront, above your doors and window panes.
Modern styles have separate glass panels separated by aliminium mullions.
Sometimes, the area has already been filled with metal, plastic, wood etc. In these cases a Signboard is the best solution.
Sometimes, Hampers can be irregular glass surfaces. In those cases, you will need a Signboard to do the job. Lightweight PVC is the best choice for that job.
Under Awning Signs hang below the awning above the footpath.
There are two main versions - Under Awning Signboard or illuminated (Lightbox).
Single or double sided.
A-frame signs can be made to any size and format (portrait, landscape).
Most Australian Councils limit the size to 900x600mm for footpath display so that is the most popular size availanle.
Next most popular is 1200x900mm. Above this size becomes very hard to handle by junior staff.
Go here to order.
As usual, we design your sign for Free!
Signboards can be made of many materials, the most usual being:
Plastic - Korflute, PVC, Polycarbonate, Acrylic, Wood, Glass, Aliminium, Colorbond
We can supply any background material available, if you have specific requirements
Wall signs are almost always Signboards.
The most common alternative is Signwriting directly onto the wall surface.
Ther is also the alternative of pre-finished wall surfaces. If these are a smooth surface DIY Signkits would be a suitable choice.
Banners can be made to any length, any height, any graphic, any message, single sided, double sided - totally as you require.
Click here to order.
Vehicles can now have any message, any graphic.
Send us pictures - front, back and sides and we will design your order to exactly fit your vehicle.
Click here to order your DIY Signkit now.